vagrant up : pas de réponse

142667
,

Bonjour,

Je tente d'installer vagrant sous mon Windows 7.

Lors du vagrant init, pas de problème, ça me créé bien le fichier Vagrantfile.

Dans le fichier de configuration, j'indique seulement un dossier data pour mettre mes fichiers en dur
et un chemin /var/www/html pour le serveur...

Mais lors du vagrant up, plus rien....

Il n'y a pas de suite, le curseur clignote à l'infini sans configuration de quoique ce soit.
Ca plante juste après le vagrant up.

Juste un dossier .vagrant qui se créé mais vide.. Et aucune VM sur ma VirtualBox..

J'ai essayé avec la console windows et cmder, même résultat.

Et ça ne me le fait que chez moi, car à l'école ça marche parfaitement bien.

Merci.

6 Réponse

142667
,

-- mode: ruby --

vi: set ft=ruby :

All Vagrant configuration is done below. The "2" in Vagrant.configure

configures the configuration version (we support older styles for

backwards compatibility). Please don't change it unless you know what

you're doing.

Vagrant.configure("2") do |config|
# The most common configuration options are documented and commented below.
# For a complete reference, please see the online documentation at
# https://docs.vagrantup.com.

# Every Vagrant development environment requires a box. You can search for
# boxes at https://vagrantcloud.com/search.
config.vm.box = "ubuntu/xenial64"

# Disable automatic box update checking. If you disable this, then
# boxes will only be checked for updates when the user runs
# vagrant box outdated. This is not recommended.
# config.vm.box_check_update = false

# Create a forwarded port mapping which allows access to a specific port
# within the machine from a port on the host machine. In the example below,
# accessing "localhost:8080" will access port 80 on the guest machine.
# NOTE: This will enable public access to the opened port
# config.vm.network "forwarded_port", guest: 80, host: 8080

# Create a forwarded port mapping which allows access to a specific port
# within the machine from a port on the host machine and only allow access
# via 127.0.0.1 to disable public access
# config.vm.network "forwarded_port", guest: 80, host: 8080, host_ip: "127.0.0.1"

# Create a private network, which allows host-only access to the machine
# using a specific IP.
config.vm.network "private_network", ip: "192.168.33.10"

# Create a public network, which generally matched to bridged network.
# Bridged networks make the machine appear as another physical device on
# your network.
# config.vm.network "public_network"

# Share an additional folder to the guest VM. The first argument is
# the path on the host to the actual folder. The second argument is
# the path on the guest to mount the folder. And the optional third
# argument is a set of non-required options.
config.vm.synced_folder "data", "/var/www/html"

# Provider-specific configuration so you can fine-tune various
# backing providers for Vagrant. These expose provider-specific options.
# Example for VirtualBox:
#
# config.vm.provider "virtualbox" do |vb|
# # Display the VirtualBox GUI when booting the machine
# vb.gui = true
#
# # Customize the amount of memory on the VM:
# vb.memory = "1024"
# end
#
# View the documentation for the provider you are using for more
# information on available options.

# Enable provisioning with a shell script. Additional provisioners such as
# Puppet, Chef, Ansible, Salt, and Docker are also available. Please see the
# documentation for more information about their specific syntax and use.
# config.vm.provision "shell", inline: <<-SHELL
# apt-get update
# apt-get install -y apache2
# SHELL
end

142667
,

Bonjour,

Alors ?

142667
,

...

Personne pour me répondre ? ...

17162
,

Ton code comme ceci est bien plus lisible, ça permet en plus de voir le code qui est commenté et celui qui ne l'est pas d'un seul coup d'oeil.
Tu ne crois pas ?

-- mode: ruby --
vi: set ft=ruby
Vagrant.configure("2") do |config|
# The most common configuration options are documented and commented below.
# For a complete reference, please see the online documentation at
# https://docs.vagrantup.com.

# Every Vagrant development environment requires a box. You can search for
# boxes at https://vagrantcloud.com/search.
    config.vm.box = "ubuntu/xenial64"
# Disable automatic box update checking. If you disable this, then
# boxes will only be checked for updates when the user runs
# vagrant box outdated. This is not recommended.
# config.vm.box_check_update = false

# Create a forwarded port mapping which allows access to a specific port
# within the machine from a port on the host machine. In the example below,
# accessing "localhost:8080" will access port 80 on the guest machine.
# NOTE: This will enable public access to the opened port
# config.vm.network "forwarded_port", guest: 80, host: 8080

# Create a forwarded port mapping which allows access to a specific port
# within the machine from a port on the host machine and only allow access
# via 127.0.0.1 to disable public access
# config.vm.network "forwarded_port", guest: 80, host: 8080, host_ip: "127.0.0.1"

# Create a private network, which allows host-only access to the machine
# using a specific IP.
    config.vm.network "private_network", ip: "192.168.33.10"
# Create a public network, which generally matched to bridged network.
# Bridged networks make the machine appear as another physical device on
# your network.
# config.vm.network "public_network"

# Share an additional folder to the guest VM. The first argument is
# the path on the host to the actual folder. The second argument is
# the path on the guest to mount the folder. And the optional third
# argument is a set of non-required options.
    config.vm.synced_folder "data", "/var/www/html"
# Provider-specific configuration so you can fine-tune various
# backing providers for Vagrant. These expose provider-specific options.
# Example for VirtualBox:
#
# config.vm.provider "virtualbox" do |vb|
# # Display the VirtualBox GUI when booting the machine
# vb.gui = true
#
# # Customize the amount of memory on the VM:
# vb.memory = "1024"
# end
#
# View the documentation for the provider you are using for more
# information on available options.

# Enable provisioning with a shell script. Additional provisioners such as
# Puppet, Chef, Ansible, Salt, and Docker are also available. Please see the
# documentation for more information about their specific syntax and use.
# config.vm.provision "shell", inline: <<-SHELL
# apt-get update
# apt-get install -y apache2
# SHELL
end
142667
,

Bonjour,

Oui en effet, mais je suis nouvelle sur le forum et je n'ai pas su mettre en forme le texte...

Merci

142667
,

Du coup quelqu'un pourrait-il m'aider ? ...